Quality Construction
This is a handmade Finishing Press with a stand. It is made from laminated hardwoods with hard rock maple jaw faces and sloped shoulders. All surfaces are danish oil sealed and hard-waxed to a silky smooth finish. Smooth turning maple handles and ACME double-threaded steel screws (made in USA) bring the press together.
Unique Turning Handles and Steel Screws Instead of Wood
The handles are built to turn in opposite directions (one clockwise and the other counterclockwise) for opening and closing. This change is different from traditional designs. I have found it easier to use and it allows me to build the press for you at a lower cost.
Most traditional finishing presses and lying presses are made with wood threaded rods. This increases the production cost considerably for little benefit. In my experience, the wood threads eventually chip and break off, not to mention the problems with expansion and contraction from humidity, making it difficult to turn the handles.
I am confident you will be satisfied with the quality and functionality of this finishing press. There aren’t many styles of finishing presses available on the market and none that come with a stand. Look around and you’ll find that this is an exceptional value.
Finishing Press Dimensions
Dimensions are approximate as these are made one at a time:
- Between the sloped shoulders 14-1/2″ +-
- Between the screws 15-1/4″ +-
- Opening size 5″+-
- Jaw height 3″ +-
- Screws are 7/16″ ACME steel, double-threaded, made in USA
It Comes With a Stand
Included with this press is also a simple stand that allows the book to stand free of the table. From the table to the top of the press is 9″. This stand is removable for storage or to use the press alone.
Other Possibilities
Available as a separate purchase, Tying-up Boards turn this finishing press or any other finishing/book press into a Tying-up Book Press.
I also make an affordable Plough that works on this finishing press used upside down, clamped to a workbench or table.
Custom larger and smaller sizes are available upon request. Tell me how I can help you on the contact form.
Purchase this Bookbinding Finishing Press – $235
Purchase and take delivery of this finishing press by following the steps on the purchase page. Customized finishing presses are available too. Send your special requirements through the contact page and I will get back to you.
Note: The appearance of the press you receive may vary some from the one pictured as I build each one individually from materials available at the time.